| Welcome to CEL Scientific Corporation |
| 5035 Samplers |
| Terms and conditions |
| Copyright © 2006 CEL Scientific Corporation. All Rights Reserved. |
Features:
> Same "high-tech" material as En Core sampler
> Airtight, tested leak-free up to 25 psi pressure
> VOC recovery as good as En Core, guaranteed
> Thread-on cap with PTFE seal
> Visual Indicator for prompt reading of sample
volume
> Built-in plunger releases sample with one push
> Same "high-tech" material as En Core sampler
> Airtight, tested leak-free up to 25 psi pressure
> VOC recovery as good as En Core, guaranteed
> Thread-on cap with PTFE seal
> Visual Indicator for prompt reading of sample
volume
> Built-in plunger releases sample with one push
After removing the 5035
Sampler from its bag,
screw off the cap and
position the thread
protector over sampler
body as shown.
Push the 5035 Sampler
into bottom of the
T-Handle*, plunger top
first, until it snaps firmly
into place.
*Note: CEL Scientific 5035
Samplers are to be used
only with T-Handles made
by CEL (sold separately).
Sampler from its bag,
screw off the cap and
position the thread
protector over sampler
body as shown.
Push the 5035 Sampler
into bottom of the
T-Handle*, plunger top
first, until it snaps firmly
into place.
*Note: CEL Scientific 5035
Samplers are to be used
only with T-Handles made
by CEL (sold separately).
Hold the T-Handle and
push the sampler body
into soil completely.
Check visual indicator to
make sure the sampler is
full.
Remove and discard the
thread protector, and
thread cap onto sampler
body while it is still
attached to the T-Handle.
Hold the sampler body
and push the quick
release button to remove
the sampler.
push the sampler body
into soil completely.
Check visual indicator to
make sure the sampler is
full.
Remove and discard the
thread protector, and
thread cap onto sampler
body while it is still
attached to the T-Handle.
Hold the sampler body
and push the quick
release button to remove
the sampler.
Make sure the cap is on
tight before place the
sampler back into zipper
bag. Seal and label the
bag and put it on ice.
To extrude sample, hold
the sampler with its cap
pointing up to prevent
spilling, and remove the
cap. Hold the sampler
like a syringe, and then
push the plunger top
with your thumb.
tight before place the
sampler back into zipper
bag. Seal and label the
bag and put it on ice.
To extrude sample, hold
the sampler with its cap
pointing up to prevent
spilling, and remove the
cap. Hold the sampler
like a syringe, and then
push the plunger top
with your thumb.
1. PREP TO SAMPLE
2. TAKING SAMPLES:
3. AFTER SAMPLING
| 1-4 5+ |
$275.00/Box ($5.50 Each) + Free T-Handle
$250.00/Box ($5.00 Each) + Free T-Handle
$250.00/Box ($5.00 Each) + Free T-Handle
T-Handle
$20.00/Each
$20.00/Each
User Instructions
5035 Sampler-5g (Box of 50)
Plunger Top----
----Thread Protector
Sampler Body---
Quick Release----
---Visual Indicator
Cap------
The Revolutionary 5035 Samplers
Get a free T-Handle with your
order!
order!
5035 sampler was developed by CEL Scientific Corporation to specifically meet
the requirements of US EPA 5035 method for collecting soil samples that need
to be analyzed for VOC contamination and to make field soil sampling easy,
quick and accurate.
the requirements of US EPA 5035 method for collecting soil samples that need
to be analyzed for VOC contamination and to make field soil sampling easy,
quick and accurate.
 |  |  |  |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
View Cart
| 13824 Bentley Place Cerritos, CA 90703, USA Tel: +1 (800) 214-0845 Fax: +1 (562) 309-0167 |